To maximize the performance of hydraulic seal excellent and durability, and avoid installation improper damaged seals, shaft sealing surface and groove are needed appropriate processing. When installed, Hydraulic sealing lip must face the pressure side.
Shaft
■Shaft surface hardness≧40HRC(poor lubrication or high speed occasion≧ 58HRC)
■Grinding and polishing the surface to remove the sharp angle, the surface roughness Ra=0.2～0.5 um,vacuum applications Ra≦0.2um
■Shaft dimensional tolerances h11
■Face conduction angle 15° to 30°
Groove
■Surface roughness Ra≦0.8um
■Groove dimensional tolerances H8
■Face conduction angle 5° to 15°
More info for hydraulic seal pls click http://www.othchina.com/chanpin.asp?sort=1
or send mail to oth01@othchina.com
we will reply you ASAP.
